准则一我们每个人都有权利和义务阻止一切不安全行为
We each have the right and duty to stop any unsafe activity Each of us the
在危险的条件下我们可以拒绝工作
We are expected to refuse to work in dangerous conditions
对不安全的条件和行为,我们必须立即向上汇报
We must immediately report unsafe conditions or acts to our supervisor And
我们的安全要互相负责
We are responsible for each other’s safety
上岗前一定要培训
Do not do a job before being trained
准则二工作时使用合适的工具
Use the right tool for the job your
使用专门为手上干的活而设计的正确的器具
Use only the proper equipment designed for the job at hand
每天检查你的工具,不要使用有缺陷的工具或器具
Inspect your tools daily. Do not work with defective tools or equipment
对新的工作和上级一起设计正确的方法
On new jobs, plan the proper method with your supervisor
严禁超载使用工具,器具或机器
Never overload tools, equipment or machines
准则三永远使用工作所需的安全设施
Always use the safety equipment required for the job
必须自始至终穿戴工作所需的个人防护用品
Personal Protection Equipment required for the job must be worn all the time
严禁损坏或取消安全装置或安全挡板
Never disable or bypass a safety device or safety barrier
每天检查个人防护用品,发现有坏的,替换掉
Check PPE daily and replace any faulty items The
准则四对所有事故要立即响应
Act on all accidents immediately
使事故地区恢复安全: 排除危险
Make the area safe: remove the danger
急救及正确的医疗处理
Get first aid and proper medical care
必须准确地记录和汇报所发生的经过
Accurate recording and reporting of the facts must be done
让所有的员工了解事故
Communicate the findings to all
准则五小心重物
Beware of heavy objects
提升重物时,使用正确的设备,不要超载
When lifting, use the right equipment, and do not overload it
提升或搬运重物时,要有足够的,合适的帮助
Get enough, qualified help when lifting or moving heavy things
人在提升重物时,要学会正确的方法,必要时使用个人防护用品
In manual lifting, learn the right way to lift, and use PPE when required
不要站在会有东西掉下来的地方
Avoid being where things can fall on you
准则六注意旋转的机器设备
Beware of rotating machinery
确保旋转的机器有防护罩或挡板
Make sure that rotating tools are guarded with shields or barriers
没有防护罩或挡板时,千万要注意,不要碰到旋转部分
When that is not possible, use great caution never to come into contact with a rotating part
在旋转或活动的部件上工作时,要事先确保已安全锁定,并且不会意外开动
fore working on a part that rotates or moves, make sure that it is safely locked out and of cannot be started accidentally
准则七小心行走 避免滑倒和摔倒
Tread with Care! Avoid Slips and Falls
高空作业或在高于1.8米处作业,要使用正确的安全器具
At heights, or over openings of over 1,8m or 6ft, use the correct safety equipment
走,不要跑
Walk, don’t run
准则八眼睛需要特别的保护
Eyes need Special Protection
对眼睛有危险的地方,要戴上护目镜
Use glasses with side shields where there is any risk at all
使用化学品时，要与眼睛保持足够距离
Use fully enclosed goggles when grinding iron and steel, and where there is a risk of grease or fluids damaging the eye
焊接时,要戴好电焊面罩
Use full face welding masks for welding
准则九特别注意你的工作所特有的危险
Take special care for the risks that are special to your job
要格外注意高温炉子和高压容器,要遵守操作规程
Use extra caution with high temperature furnaces and high pressure vessels: follow the rules
Be caution with
对任何在你的工作场所使用的危险物品,要确保知道正确的处理方法
Make sure you know the proper way to handle any hazardous substances used in your workplace
要一直学习并不折不扣地遵守矿山和工厂的规章制度
On mines and in factories, learn the rules and follow them exactly, all the tim Learn and follow the rules
有爆炸性气体(如甲烷)的地方,要极其注意其危险
Use extreme caution when there is a danger of explosive gases (e.g. methane) being present Where the explosive gases are being used.
准则十交通安全
Traffic Safety
每天检查车辆,确保车辆处于安全的工作状态
Inspect the vehicle daily to confirm that it is in safe working order
驾驶员必须经公司批准同意,并有相应的驾驶证
he driver must be authorized and licensed to drive the class of vehicle The vehicle of class
所有乘客必须系上安全带,没有安全带就不能坐车
All occupants must wear seat belts: no belt, no ride